Tuesday, December 23, 2008

Fixing a Mouse Double Click Problems

Have you ever experience a bad optical mouse? It went double click action whenever you did a single click action? At first, I try to Google for answer but none of them help. I’ve tried every combination of settings but the problem doesn’t go away. I really suspected there must be something wrong with the circuit. After I made a conclusion that it is a mechanical related issue (maybe the switch it self), I replace the switch from an old mouse available.





Unfortunately the problem is still there. This is dangerous since you might drag a folder by accident and move it into another folder. This problem always happening to a first time touch-pad user with tapping function turned on.





So next I’m thinking it maybe related to a noise in the circuit. So without any calculation, I try to salvage a capacitor that l can find from an old circuit board and solder it parallel to the switch.





:-) Now it become “click and hold” for about 10 seconds. The capacitor value that I used to smooth the noise from the circuit is too big causing it to simulate “click and hold”. After measuring the capacitance it shows about 2µF. Too big maybe.





Next I try to find a capacitor with quite smaller capacitance value (~2nF). Maybe this will do. So I just replace it.





Walla! At last like a brand new mouse looks and feel. Good luck.